Single flute for fast cutting.
Specially ground for cutting acrylic.
Cutter ref ACR2/80 can be used on phenolic…
Two flute for fine finish.
Specially ground for cutting acrylic.
Cutter ref ACR3/81 can be used on phenolic…
Single flute for fast cutting.
Specially ground for cutting acrylic.
Cutter ref ACR2/80 can be used on phenolic…
Single flute for fast cutting.
Specially ground for cutting acrylic.
Cutter ref ACR2/80 can be used on phenolic…
Two flute for fine finish.
Specially ground for cutting acrylic.
Cutter ref ACR3/81 can be used on phenolic…
Flush cut pull saw for trimming of plug/pellet and dovetail joints.
Teeth have no set, so they can cut right at…
Spare saw blade for Folding Flush Saw 120mm ref. FFS/120.
Specifications
TPI=22 (1.15 mm)
Kerf=0.4 mm
Blade length=120 mm
Restriction=Not to be sold to persons…
With 45 degree angled angled wings.
For perfect mitre cuts of seals, mouldings, beadings and weatherseals.
Can be used to…
With 45 degree angled angled wings.
For perfect mitre cuts of mouldings, beadings and weatherseals.
Can be used to cut…
Replacement blade for the HM/SHEAR.
Chrome vanadium blade.
Blade can be changed by using an 8mm A/F spanner.
Specifications
Restriction=Not to be sold to…
Replacement alloy wing for the HM/SHEAR.
Wing can be changed by using an 8mm A/F spanner.
Specifications
…
Up-cut helical gives long lasting super fine finish.
Specifications
D=3 mm
C=15/32 inch
C=12 mm
Shank Diameter=1/4 inch
Overall length=58 mm
…
Up-cut helical gives long lasting super fine finish.
Specifications
D=5/32 inch
D=4 mm
C=15/32 inch
C=14 mm
Shank Diameter=1/4 inch
Overall length=59 mm
…
Up-cut helical gives long lasting super fine finish.
Specifications
D=13/64 inch
D=5 mm
C=3/4 inch
C=19 mm
Shank Diameter=1/4 inch
Overall length=59 mm
…
Up-cut helical gives long lasting super fine finish.
Specifications
D=15/64 inch
D=6 mm
C=3/4 inch
C=19 mm
Shank Diameter=1/4 inch
Overall length=59 mm
…
Down-cut helical gives long lasting super fine finish on fine acrylics. Prevents vibration.
Specifications
D=1/4 inch
D=6.3 mm
C=19 mm
Shank Diameter=1/4 inch
Overall length=57.5…
Up-cut helical gives long lasting super fine finish.
Specifications
D=1/4 inch
D=6.3 mm
C=19 mm
Shank Diameter=1/4 inch
Overall length=57.5 mm
…
Special high grade sub-micrograin carbide with very high tolerance grinding for smooth clean cut in acylic, wood, and manmade boards,…
Special high grade sub-micrograin carbide with very high tolerance grinding for smooth clean cut in acylic, wood, and manmade boards,…
Solid carbide two flute pin guided spiral for trimming acrylic and wood and MDF.
Solid brass pin guide.
Two flute for clean…