Bearing Guided Chamfer Cutters
10H/1X1/4TC Pin guided chamfer bevel cutter 45 degrees
Ideal for fast chamfering.
Popular in the sign making trades.
For chamfering edges of plastic material .
Specifications
C=10 mm
C2=14…
- Model
- 10H/1X1/4TC
10H/2X1/4TC Pin guided chamfer bevel cutter 30 degrees
Ideal for fast chamfering.
Popular in the sign making trades.
For chamfering edges of plastic material .
Specifications
C=6.3 mm
C2=12…
- Model
- 10H/2X1/4TC
11/20X1/4TC Panel mould cutter
Template thickness should be at least 5mm thicker than cutter cut length of cutter.
Approx. 1.0mm flat will be found…
- Model
- 11/20X1/4TC
11/40X1/4TC Panel mould cutter
Template thickness should be at least 5mm thicker than cutter cut length of cutter.
Approx. 1.0mm flat will be found…
- Model
- 11/40X1/4TC
11/41X1/2TC Panel mould cutter
Template thickness should be at least 5mm thicker than cutter cut length of cutter.
Approx. 1.0mm flat will be found…
- Model
- 11/41X1/2TC
41/5X1/4TC Guided 3 flute 45 degree chamfer x 11mm cut
Three flutes for extra fine finish.
Ideal for newel posts and caps for stairs.
Supplied with one bearing.
Specifications
D1=34 mm
C=11 mm
B=12.7…
- Model
- 41/5X1/4TC
46/103X1/2TC Bevel cutter
Useful for bevelling thick timbers.
Certain sizes can be used for jointing, boxes, pilasters and carcassing.
For…
- Model
- 46/103X1/2TC
46/104X1/2TC Bevel cutter
Useful for bevelling thick timbers.
Certain sizes can be used for jointing, boxes, pilasters and carcassing.
For…
- Model
- 46/104X1/2TC
46/105X1/2TC Bevel cutter
Useful for bevelling thick timbers.
Certain sizes can be used for jointing, boxes, pilasters and carcassing.
For…
- Model
- 46/105X1/2TC
46/107X1/2TC Bevel cutter
Useful for bevelling thick timbers.
Certain sizes can be used for jointing, boxes, pilasters and carcassing.
For…
- Model
- 46/107X1/2TC
46/34X1/2TC Bearing guided bevel cutter 25 degrees
Larger bearing removes the flat.
Supplied with two bearings.
Specifications
D=41 mm
C=13 mm
C1=5 mm
C2=13 mm
B=12.7 mm
B2=19 mm
A=25 degrees
Shank Diameter=1/2 inch
…
- Model
- 46/34X1/2TC
46/34X8MMTC Bearing guided bevel cutter 25 degrees
Larger bearing removes the flat.
Supplied with two bearings.
Specifications
D=41 mm
C=13 mm
C1=5 mm
C2=13 mm
B=12.7 mm
B2=19 mm
A=25 degrees
Shank Diameter=8 mm
…
- Model
- 46/34X8MMTC
46/35X1/2TC Guided bevel cutter
Larger bearing removes the flat.
Supplied with two bearings.
Specifications
D=41.5 mm
C=13 mm
C1=8 mm
C2=13 mm
B=12.7 mm
B2=19 mm
A=35 degrees
Shank Diameter=1/2 inch
…
- Model
- 46/35X1/2TC
46/360X1/2TC Guided chamfer cutter 45 degrees
Ideal for newel posts and caps for stairs.
Supplied with one bearing.
Ref. 46/361 is supplied with a nylon bearing…
- Model
- 46/360X1/2TC
46/360X1/4TC Bearing guided chamfer cutter 45 degrees
Ideal for newel posts and caps for stairs.
Supplied with one bearing.
Ref. 46/361 is supplied with a nylon bearing…
- Model
- 46/360X1/4TC
46/361X1/2TC Guided chamfer cutter 45 degrees
Ideal for newel posts and caps for stairs.
Supplied with one bearing.
Ref. 46/361 is supplied with a nylon bearing…
- Model
- 46/361X1/2TC
46/37X1/2TC Bearing guided chamfer cutter 45 degrees
Ideal for newel posts and caps for stairs.
Supplied with one bearing.
Ref. 46/361 is supplied with a nylon bearing…
- Model
- 46/37X1/2TC
46/37X1/4TC Bearing guided chamfer cutter 45 degrees
Ideal for newel posts and caps for stairs.
Supplied with one bearing.
Ref. 46/361 is supplied with a nylon bearing…
- Model
- 46/37X1/4TC
46/380X1/2TC Bearing guided chamfer cutter 45 degrees
Ideal for newel posts and caps for stairs.
Supplied with one bearing.
Ref. 46/361 is supplied with a nylon bearing…
- Model
- 46/380X1/2TC
46/38X1/2TC Bearing guided chamfer cutter 45 degrees
Ideal for newel posts and caps for stairs.
Supplied with one bearing.
Ref. 46/361 is supplied with a nylon bearing…
- Model
- 46/38X1/2TC