JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

Result Pages:
46/06X1/4TC Combi trimmer 24mm diameter

A self-guided combination trimmer.
A 90 degree trim is obtained by engaging the bottom half.
A 45 degree trim…

Model
46/06X1/4TC
46/3X1/4TC Bevel trimmer 20mm diameter 14mm length

Cut a wider edge line, at an angle of 80 degrees.
A 16mm bearing is supplied as standard.
A larger…

Model
46/3X1/4TC
46/6AX1/4TC Bevel trim cutter

Cut a wider edge line, at an angle of 60 degrees.
A 16mm bearing is supplied as standard.
A larger 19mm…

Model
46/6AX1/4TC
46/6BX1/4TC Bevel trim cutter

Cut a wider edge line, at an angle of 45 degrees.
A 16mm bearing is supplied as standard.
A larger 19mm…

Model
46/6BX1/4TC
46/6CX1/4TC Bevel trim cutter

Cut a wider edge line, at an angle of 30 degrees.
A 16mm bearing is supplied as standard.
A larger 19mm…

Model
46/6CX1/4TC
46/6DX1/4TC Guided specialist bevel trim cutter

Cut a wider edge line, at an angle of 82 degrees.
A 16mm bearing is supplied as standard.
A larger 19mm…

Model
46/6DX1/4TC
46/6EX1/4TC Bevel trim cutter

Gives a smooth bevel finish for laminates and other materials. Bearing follows the board beneath.

Specifications
DIMENSIONS:
D1=5/8 inches
D1=15.9 mm
Cut length=1/4 inches
Cut…

Model
46/6EX1/4TC
46/6FX1/4TC Bevel trim cutter

Gives a smooth bevel finish for laminates and other materials. Bearing follows the board beneath.

Specifications
DIMENSIONS:
D1=23/32 inches
D1=18 mm
Cut length=1/4 inches
Cut…

Model
46/6FX1/4TC
C071X1/4TC Sash bar 6.3mm radius x 19.1mm cut

Ovolo cutter designed for sash bars but useful for decorative edging.

Specifications
D=3/4 inch
D=19.1 mm
C=1/2 inch
C=12.7 mm
R=6.3 mm
Overall length=53 mm
Shank Diameter=1/4 inch

Model
C071X1/4TC
C072X1/4TC Sash bar 7.9mm radius x 22.2mm cut

Ovolo cutter designed for sash bars but useful for decorative edging.

Specifications
D=7/8 inch
D=22.2 mm
C=9/16 inch
C=14.3 mm
R=7.9 mm
Overall length=55 mm
Shank Diameter=1/4 inch

Model
C072X1/4TC
C073X1/4TC Sash bar 9.5mm radius x 25.4mm cut

Ovolo cutter designed for sash bars but useful for decorative edging.

Specifications
D=1 inch
D=25.4 mm
C=5/8 inch
C=15.9 mm
R=9.5 mm
Overall length=56 mm
Shank Diameter=1/4 inch

Model
C073X1/4TC
C106X1/4TC Ovolo 3.2mm radius x 9.5mm diameter

A small beading cutter for fine decorative panelling, veining or rounding over.

Specifications
D=3/8 inch
D=9.5 mm
C=5/16 inch
C=7.9 mm
B=9.5 mm
R=3.2 mm
Overall length=48 mm
Shank…

Model
C106X1/4TC
C126X1/4TC Rounding over 4.8mm radius x 12.7mm cut

For producing ovolo and rounding over edge moulds, using a side fence or back fence.

Specifications
D=1/2 inch
D=12.7 mm
C=23/64 inch
C=9 mm
R=4.8 mm
Overall…

Model
C126X1/4TC
C126X8MMTC Rounding over 4.8mm radius x 12.7mm cut

For producing ovolo and rounding over edge moulds, using a side fence or back fence.

Specifications
D=1/2 inch
D=12.7 mm
C=23/64 inch
C=9 mm
R=4.8 mm
Overall…

Model
C126X8MMTC
C127X1/4TC Rounding over 6.3mm radius x 15.9mm cut

For producing ovolo and rounding over edge moulds, using a side fence or back fence.

Specifications
D=5/8 inch
D=15.9 mm
C=13.5 mm
R=6.3 mm
Overall length=57…

Model
C127X1/4TC
C127X8MMTC Rounding over 6.3mm radius x 15.9mm cut

For producing ovolo and rounding over edge moulds, using a side fence or back fence.

Specifications
D=5/8 inch
D=15.9 mm
C=13.5 mm
R=6.3 mm
Overall length=54…

Model
C127X8MMTC
C128X1/4TC Rounding over 9.5mm radius x 22.2mm cut

For producing ovolo and rounding over edge moulds, using a side fence or back fence.

Specifications
D=7/8 inch
D=22.2 mm
C=19/32 inch
C=15 mm
R=9.5 mm
Overall…

Model
C128X1/4TC
C128X8MMTC Rounding over 9.5mm radius x 22.2mm cut

For producing ovolo and rounding over edge moulds, using a side fence or back fence.

Specifications
D=7/8 inch
D=22.2 mm
C=19/32 inch
C=15 mm
R=9.5 mm
Overall…

Model
C128X8MMTC
C141X1/4TC Panel veining 4.8mm radius

For decorative panel and veining work.
Ideal for carving with the Routerlathe.

Specifications
D=3/8 inch
D=9.5 mm
C=7.5 mm
R=4.8 mm
Overall length=47.5 mm
Shank Diameter=1/4 inch

Model
C141X1/4TC
Result Pages: