Top



Wrt,t11ek, T35a Kit 240v
Previous
Next
Product 3 of 3
This product was added to our catalog on Tuesday 27 June, 2017.

Wrt,t11ek, T35a Kit 240v

Model WRT/KIT/A
Manufacturer Trend
Price:   £1,199.03
Trade/Bulk enquiries welcome, we can also ship anywhere in the world please contact us for a quote.
Reviews
WRT Workshop Router Table, T11EK 1/2-inch router and T35A Dust Extractor kit.

Floor standing Workshop Router Table.
It is packed with the necessary features to maximise the versatility of all popular portable routers.
Large laminated MDF table.
Quick release aluminium extrusion back fence with sliding MDF cheeks.
Removable 6.35mm thick aluminium insert plate with 98mm diameter aperture, pre drilled for Trend TBC routers and T11 routers.
Quick Raiser and Quick Release facility for the Trend T11 router.
High back fence with fully adjustable guard assembly.
Fully adjustable side finger pressure.
Front and side adjustable feather pressure guards.
Steel leg frame assembly with adjustable feet.
Two insert rings 31.8mm and 67.5mm diameter to reduce table aperture.
Lead on pin for bearing guided curved work.
Edge planing facility on back fence of 1.4mm and 2.4mm.
Cable management clips.
No volt release switch.
Mitre fence with zeroing and spelch block facility.
T11 router with built in Quick Raiser fine adjuster and electronic full wave variable control of spindle speed under load for a fine finish on all types of material.
T35A Professional wet and dry Class M auto-start vacuum extractor with power take off for professional use. Dust class category M rated to EN60335-2-69, for dust with workplace limit values > 0.1 mg/m3.
For UK sale only.

Dimensions
For UK sale only.
Rating=Professional/Craftsman
Table top size=804x604x35mm
Bench height=890mm
Router cutter aperture=98mm
Max cutter dia=86mm
Insert ring sizes=31.8mm, 67.5mm
Backfence height=68mm
Dust spout aperture=57mm
Edge planing up to=1.4 & 2.4mm
Weight=27.5kg
Voltage=240v
Max. material thickness with presssures=60 mm
Max. material width with presssures=130 mm (cutter centre)
Not intended for continuous production or production line use.
T11EK
Voltage=230 volt
Plunge stroke=0-80 mm
Power input=2000 watt
Power ampage=9.6 amp
Standard collet dia.=1/2"
No load speeds=8-20000 rpm
Weight=6.2 kg
Sound pressure Lpa=93.0 dB(A)1
Acoustic pressure Lwa=102.0 dB(A)2
Hand arm vibration=<2.5 m/s2
T35A
Power input=1400 watt
Voltage=230 volt
Dust category*=M
Power ampage=5.2 amp
Auto-start max. (230v)=2200 watt*
Auto-start min.=50 watt
Weight=7.5 kg
Sound pressure Lpa=75.0 dB(A)
Acoustic pressure Lwa=89.0 dB(A)
End of life=See below for Environmental Policy link