Wood Shelf 900x200x40mm Prime Oak - Timber

Article details
40 mm shelf thicknessPre-drilled for fixing with concealed shelf supports (not included)Hardwood shelves are constructed from 40 mm wide, finger jointed pieces of kiln dried timberRaw sanded to 150 grit and ready for finishingThe colour of the wood will change over time, giving a beautiful and matured look10 Year limited manufacturer’s warranty
Worktop version
wooden shelf
Pre-drilled
Yes
Colour reference
Prime oakThe colour of the wood will change over time, giving a beautiful and matured look
Warranty/guarantee
10 years
Tolerance
Tolerance is ±2 mm
40 mm shelf thicknessPre-drilled for fixing with concealed shelf supports (not included)Hardwood shelves are constructed from 40 mm wide, finger jointed pieces of kiln dried timberRaw sanded to 150 grit and ready for finishingThe colour of the wood will change over time, giving a beautiful and matured look10 Year limited manufacturer’s warranty
Note
Measuring up:Timber can expand as much as 1 mm/mtr. Always allow a gap of at least 3 mm if for example, worktops are captive between wallsTolerance is ±2 mmRegular use of the care and maintenance kit should ensure shelves stay in good conditionInstallation is relatively easy, for either a competent DIY enthusiast or recognised kitchen installer to carry outNo specialist tooling required. Can be cut using normal woodworking routers and bladesTimber shelves must not be installed in unoccupiedpremisesIf timber shelves are to be stored prior to installation, they should always be stored at room temperature away from all sources of heat and moisture, on a sound level surface horizontally with a minimum of four timber battens equally spaced in between each worktop and on the floorNever store in a garage or an unfinished building and always install within 7 days of deliverySeal regularly in the first couple of weeks after installation to avoid the shelves drying out
Order reference
Concealed shelf supports suitable for use with timber shelves are available to order separately: Cat. No. 283.33.904, 283.33.910, 283.33.500
Additional information attributes
Measuring up:Timber can expand as much as 1 mm/mtr. Always allow a gap of at least 3 mm if for example, worktops are captive between wallsTolerance is ±2 mmRegular use of the care and maintenance kit should ensure shelves stay in good conditionInstallation is relatively easy, for either a competent DIY enthusiast or recognised kitchen installer to carry outNo specialist tooling required. Can be cut using normal woodworking routers and bladesTimber shelves must not be installed in unoccupiedpremisesIf timber shelves are to be stored prior to installation, they should always be stored at room temperature away from all sources of heat and moisture, on a sound level surface horizontally with a minimum of four timber battens equally spaced in between each worktop and on the floorNever store in a garage or an unfinished building and always install within 7 days of deliverySeal regularly in the first couple of weeks after installation to avoid the shelves drying out